| Model ID | 210 |
| Form Factor | Floorstanding |
| Signal Path | Passive Hardware |
| Dimensions | 41.9 × 78.7 × 26.7 cm (W × H × D); 31 inches high, 16-1/2 inches wide, 10-1/2 inches deep |
| Weight | 45 lbs |
| Power | Passive |
| Frequency Response | Each speaker comes with an individually run frequency-response graph attached to the carton. |
| Ohms | 8 |
| Connections | - Speaker · Spring Terminal · 3 Way
|
| Controls | - Decrease · Toggle Switch · High / Low
|
| Notes | The low and middle frequencies are radiated by an 8-inch woofer augmented below 45 Hz by a 10-inch passive radiator. The bass system is based on a fourth-order Butterworth alignment. The woofer response has been designed to roll off naturally above 1,800 Hz, where it crosses over to a single 1-inch-diameter inverted (concave) dome tweeter. No series inductor is used to roll off the woofer's high-frequency output, so its damping is not impaired by the added resistance of a crossover coil.
The tweeter, which has a double-layer voice coil in a ferrofluid-filled gap, is designed to withstand very high power levels without damage. Every Genesis tweeter is tested for 2 minutes at 2,000 Hz at a 30-watt input (the company's tests show that it can handle 100 watts at 2,000 Hz for more than a minute). The woofer has rubber impact bumpers to minimize damage from excessive cone excursions. |
