| Form Factor | 19" Rackmount |
| Dimensions | 48.3 × 4.4 × 36 cm (W × H × D) |
| Weight | 7.5 kg |
| Power | 230VAC, 50Hz |
| Frequency Response | 10 Hz – 50 kHz |
| Input impedance / sensitivity unbalanced (RCA) / 4 ohm | 10 Kohm / 1 V 0dBV |
| Input impedance / sensitivity balanced (XLR) / 4 ohm | 20 Kohm / 1 V 0 dBV |
| THD | < 0.05 % |
| IMD | < 0.06 % |
| Noise | >100 DBA |
| Damping factor | > 200 |
| Dynamics and level control | APC, switchable for 2-3 or 4-8 ohms |
| Power amp circuit design | High current, high voltage class G |
| Efficiency (dynamic program of 10 dB, 1 V input) | 70 % |
| Protection circuits | DC, HF, clip, overcurrent, short-circuit |
| Temperature protection | 95°C/ch + transformer 105°C |
| Cooling | convectional, no fan (fanless) |
| Power consumption | 15VA idle, 600VA full program, 1KVA peak |
| Channels | 2 Channel |
| Connections | - Channel 1 balanced input · XLR · Balanced
- Channel 1 unbalanced input · RCA (Phono, Cinch) · Unbalanced
- Channel 1 link · XLR · Balanced
- Channel 1 speaker · Binding Post · 1 Way
- Channel 2 balanced input · XLR · Balanced
- Channel 2 unbalanced input · RCA (Phono, Cinch) · Unbalanced
- Channel 2 link · XLR · Balanced
- Channel 2 speaker · Binding Post · 1 Way
|
| Controls | - Volume potmeter channel 1 · Rotary Pot · 0 - 10
- Volume potmeter channel 2 · Rotary Pot · 0 - 10
- Power switch · Rocker Switch · 0 - 1
- Ground lift switch · Slide Switch · LIFT - EARTH
- Bridge mode switch · Slide Switch · STEREO - BRIDGE
- Speaker load impedance selector channel 1 · Latching Push Switch · 2-3 ohm / 4-8 ohm
- Speaker load impedance selector channel 2 · Latching Push Switch · 2-3 ohm / 4-8 ohm
|
