ESC
Saga +

Saga +

BrandSchiit
FunctionAmplifier, Pre (Hybrid Tube Buffer Stage)
CountryUSA
Form FactorDesktop
Weight6lb
Power120v AC
Frequency Response20Hz-20Khz, -0.2db, 3Hz-200KHz, -3dB
Linkshttps://www.schiit.com/products/saga-2
NotesTHD: <0.001%, 20Hz-20KHz, at 1V RMS IMD: <0.001%, CCIR (active stage) SNR: >108db, A-weighted, referenced to 1V RMS Output Impedance: 180 ohms Maximum Output: >10V RMS Passive Stage: Output Impedance: varies, maximum 4.8 kohms Both Passive or Active Stage: Gain: Approximately 1 (0dB) through either passive or active stage Input Impedance: 10 kohms Crosstalk: >-75dB, 20Hz-20KHz Inputs: 5 RCA pairs, selectable via front switch or remote Outputs: 2 RCA pairs, selectable via front switch or remote Buffer Stage: Hybrid push-pull tube-BJT buffer stage with equalized transconductance Volume Control: relay-switched stepped attenuator with discrete thin-film resistors , 64 1dB steps Power Supply: One 24VA transformer with regulated +/-100V rails, plus 6.3VDC heaters and 5VDC for microprocessor Power Consumption: 25W typical