| Notes | Commentary
SL-1200LTD series analog player that has been announced as a limited edition.
It has integrated motor rotating unit and the turntable, and has a fixed portion adopted DD motor unique structure was integrated with the cabinet made of aluminum die casting. This is the motor is using the entire circumference integral FG, and has enabled high-precision signal detection by detecting all around the exact rotation to. In addition, I will be able to be a constant speed in the turn table 0.7 seconds (33 1 / 3rpm) by starting torque 1.5kg · cm of high power.
In addition, the stop mechanism is adopted the pure electronic formula brake. This takes quickly brake at the touch of a button, it will be canceled as soon as you stop.
The rotation control is equipped with a continuous variable pitch control mechanism using a quartz synthesizer system, it is possible to slide 8 percent of continuous pitch control ± in the lever while maintaining the exact rotation.
In SL-1200LTD, pitch ON / OFF switch has been added, you will be able to return to ± 0% constant speed rotation at the touch of a button.
It is equipped with a quartz lock synchronized with the strobe illuminator, you can check the carved rotation pitch on the turntable side strobe. This flash, when the dot appears to still, ± 6%, ± 3.3%, ± 0%, - 3.3% of the shows the number of revolutions.
The cabinet has been subjected to anti-vibration measures were thorough, making aluminum die-casting at the top, integrally molded of special heavyweight rubber at the bottom, a three-layer structure using TNRC (Technics Non-Resonance Compound) inside. In addition, the back surface of the turntable and paste the deadening rubber, and is raising the vibration resistance.
In addition, we are reducing the external vibration by height adjustment are four large insulator possible.
The SL-1200LTD it has adopted a precision die-cast tone arm is 24 karat gold-plated was decorated, we have to reduce the influence of external vibration or partial resonance.
In the bearing structure is adopted a gimbal suspension of a combination of four bearings with high precision pivot and precision grinding ball bearing, to clarify the reversal of vertical rotation axis and the horizontal rotation axis center of rotation of the tone arm intersects have. This I has won the excellent initial sensitivity of the same in the 7mg following in all directions.
It is equipped with a locking mechanism with arm height adjustment mechanism, can can be finely adjusted in 6mm range by height adjustment ring of precision helicoid finish, reducing the vertical tracking error.
equipped with a pop-up stylus illumination.
Coming with the Technics Hi fidelity audio cord.
Serial number is engraved on the logo plate of the top plate. |
