| Form Factor | Tabletop |
| Signal Path | Analog Hardware |
| Dimensions | 16" W x 12" D x 3.75” H |
| Frequency Response | 20Hz-20Khz, -0.25db, 2Hz-110KHz, -3dB |
| Total Harmonic Distortion | Less than 0.006% (20-20kHz 1V RMS) |
| IMD | Less than 0.008% (CCIF at 1V RMS, high gain mode (worst case), lower gain modes have lower distortion) |
| SNR | More than 103db (unweighted, referenced to 1V RMS, in gain = 1 mode) |
| Crosstalk | Less than -80dB (20-20kHz) |
| Output Impedance | 0.03 Ohm |
| Channels | 2 Channel |
| Connections | - Input 1 · XLR · Stereo, Balanced
- Input 2 · XLR · Stereo, Balanced
- Input 3 · RCA (Phono, Cinch) · Stereo, Unbalanced
- Input 4 · RCA (Phono, Cinch) · Stereo, Unbalanced
- Input 5 · RCA (Phono, Cinch) · Stereo, Unbalanced
- Pre 1 · XLR · Stereo, Balanced
- Pre 2 · RCA (Phono, Cinch) · Stereo, Unbalanced
- SE Headphone · 1/4" Phone Jack (6.35mm) · Unbalanced, Stereo
- Balanced Headphone · XLR · Stereo, Balanced
- Speaker Terminals · Binding Post (Universal) · Stereo, Balanced
|
| Controls | - Volume · Rotary Encoder · 64 steps from -0dB to -76.8dB plus mute
- Input select · Momentary Push Switch · 1-5
- Gain switch · Momentary Push Switch · 1,5,20
|
| Links | Product Page |
| Notes | Marketed as a universal amplifier, class A until 6W, class AB from then on. Bias is monitored and adjusted by a micro-controller housed on the main logic board. |
