| Form Factor | Floorstanding |
| Signal Path | Analog Hardware |
| Dimensions | 43.2 × 152.4 × 50.8 cm (W × H × D) |
| Weight | 136lbs |
| Frequency Response | 16Hz-36kHz ±3dB |
| Tweeter (Front) | 1" Circular Quasi-Ribbon/Planar-Magnetic (Single Ended) (Aluminum trace, Kapton backing) |
| Tweeter (Rear) | 1" Circular Quasi-Ribbon/Planar-Magnetic (Single Ended) (Aluminum trace, Kapton backing) |
| Midrange | 5.25" Titanium cone |
| Mid-Bass Coupler | 6.5" Aluminum cone (x2) |
| Bass (Side) | 12" Ribbed Aluminum Woofer (Servo-Controlled) |
| Input Sensitivity | 90dB/W/m |
| Input Impedance | 4Ω |
| Crossover Slope | 24db/oct (Fourth Order Linkwitz-Riley) |
| Bass Amplification | 500W (Servo-Control Amplifier) |
| Recommended Power (Tube) (Min/Max) | 75W/500W |
| Recommended Power (Solid State) (Min/Max) | 100W/1000W |
| Finish | Maple body with Cebuano Rosewood shield, Maple body with Olive Burl shield, Arctic Silver body with Slate Grey shield |
| Connections | - Input · Binding Post
- Input (Preamp) · XLR · Balanced, Mono, Socket (Female)
- Input (Preamp) · RCA (Phono, Cinch) · Unbalanced, Mono, Socket (Female)
- Input (LFE) · XLR · Balanced, Mono, Socket (Female)
- Input (LFE) · RCA (Phono, Cinch) · Unbalanced, Mono, Socket (Female)
- Output (Buffered LFE) · XLR · Balanced, Mono
- Output (BufferedLFE) · RCA (Phono, Cinch) · Unbalanced, Mono, Socket (Female)
|
| Controls | - Tweeter Level · Rotary Pot · ±1dB
- Midrange Level · Rotary Pot · ±0.75dB
- Low Pass Crossover Frequency
- Bass Gain (Servo Amplifier)
- LFE Gain
|
| Notes | Reboot of the APM-I with the APM-2s woofers, this was one of the first new models released after the Gary Koh buy-out of Genesis Technologies and restructuring into Genesis Advanced Technologies. |
