| Form Factor | Half-Width |
| Signal Path | Analog Hardware |
| Dimensions | 205 x 76 x 276 mm
8 x 3 x 11 in |
| Power | 120V AC, 240V AC according to makret. Integrated cable and plug. |
| Input Sensitivity | Phono (Moving Magnet) (2.5mV, 47k Ohm) |
| Input Sensitivity | Tuner, Tape (75mV, 47k Ohm) |
| Output Sensitivity | Tape (75mV, 1k Ohm) |
| Channels | 3 Channel (Stereo Input), 1 Channel (Stereo Out (Tape)), 1 Channel (Stereo Out (Loadspeaker)) |
| Connections | - Tape In/Out · DIN · 5 Way
- Tuner In · DIN · 5 Way
- Phono In · RCA (Phono, Cinch)
- Phono Eartth · Binding Post
- Output L/R · Banana · Socket (Female)
|
| Controls | - Volume · Rotary Pot
- Balance · Rotary Pot · -3dB on left channel ONLY.
- Source Selection · Latching Push Switch · Phono, Tuner, Tape
- Power · Latching Push Switch
|
| Displays | - Power On · Red LED (early models), Green LED (late models)
|
| Notes | Power, frequency response, etc. specifications were not published. Manual states:
"Low continuous power output is balanced by a very large peak current capacity, so there are no restrictions on the size and type of loudspeakers that may be used. But please don't expect the impossible."
Originally sourced with red LED to indicate power on; switched to green LED in 1985. |
