| Form Factor | Standard Width |
| Signal Path | Analog Hardware |
| Dimensions | 423 x 136 x 358mm |
| Weight | 9.3kg |
| Power | AC 110/120/220/240V, 50Hz/60Hz |
| AMPLIFIER : Damping factor | 80 |
| AMPLIFIER SECTION : Frequency Response | 10Hz to 70kHz (+0, -1dB) |
| AMPLIFIER SECTION : Input Impedance | 100kΩ |
| AMPLIFIER SECTION : Intermodulation Distortion | 0.05% (Rated power output) |
| AMPLIFIER SECTION : Load Impedance | 4-16Ω |
| AMPLIFIER SECTION : Power Bandwith (IHF) | 10-100kHz (-3dB, THD 0.2%) |
| AMPLIFIER SECTION : Power Output | 45W / 45W (Continuous, each channel driven, 4Ω) |
| MPLIFIER SECTION : Power Output | 33W / 33W (Continuous, each channel driven, 8Ω) |
| MPLIFIER SECTION : Power Output | 36W + 36W (Continuous, both channels driven, 4Ω) |
| MPLIFIER SECTION : Power Output | 26W + 26W (Continuous, both channels driven, 8Ω) |
| AMPLIFIER SECTION : Power Output (IHF) | 125W (Dynamic, 4Ω) |
| AMPLIFIER SECTION : Power Output (IHF) | 82W (Dynamic, 8Ω) |
| AMPLIFIER SECTION : Rated Input | 1V |
| AMPLIFIER SECTION : Signal to Noise Ratio (IHF) | 110dB (A network) |
| AMPLIFIER SECTION : Total Harmonic Distortion | 0.03% (10W Output) |
| AMPLIFIER SECTION : Total Harmonic Distortion | 0.1% (Rated power output) |
| PRE AMPLIFIER SECTION : Input Sensitivity / Impedance | 1/2:1.2/2.4/4.8mV / 50kΩ (Phono) |
| PRE AMPLIFIER SECTION : Input Sensitivity / Impedance | 100mV / 100kΩ (Tuner, Aux, Tape) |
| PRE AMPLIFIER SECTION : Intermodulation Distortion | < 0.05% (At rated output) |
| PRE AMPLIFIER SECTION : Total Harmonic Distortion from 20Hz to 20kHz | < 0.03% (At rated output) |
| PRE AMPLIFIER SECTION : High Filter | 7kHz (6dB/oct) |
| PRE AMPLIFIER SECTION :Low Filter | 30Hz (6dB/oct) |
| PRE AMPLIFIER SECTION : Frequency Response | 10Hz to 70kHz (Tuner, Aux (+0,-1dB)) |
| PRE AMPLIFIER SECTION : Frequency Response | 30Hz to 15kHz (Phono1, Phono2 (+-0.5dB)) |
| PRE AMPLIFIER SECTION : Loudness Contour | +5B (70Hz), +5dB (10kHz) |
| PRE AMPLIFIER SECTION : Muting | -20dB |
| PRE AMPLIFIER SECTION : Output Voltage | 1V (2,2kΩ) |
| PRE AMPLIFIER SECTION : Output Voltage | 100mV (Rec Out, 10kΩ) |
| PRE AMPLIFIER SECTION : Phono Overload Level (RMS) | 230mV (1kHz) |
| PRE AMPLIFIER SECTION : Phono Overload Level (RMS) | 1.1V (10kHz) |
| PRE AMPLIFIER SECTION : Signal to Noise Ratio (IHF) | 75db (Phono1, Phono 2 (A network)) |
| PRE : Signal to Noise Ratio (IHF) | 90dB (Tuner, Aux, Tape (A network)) |
| Semiconductors | 39 transistors, 18 diodes, 2 thermistors |
| Channels | 2 Channel |
| Connections | - AC Outlet (switched) · Other
- AC Outlet (switched) · Other
- AC Outlet (Unswitched) · Other
- AC Outlet (Unswitched) · Other
- Aux · RCA (Phono, Cinch) · Socket (Female), Stereo
- GND · Binding Post
- Headphone · 1/4" Phone Jack (6.35mm) · Socket (Female), Stereo
- Microphone · 1/4" Phone Jack (6.35mm) · Socket (Female), Stereo
- Phono · RCA (Phono, Cinch) · Socket (Female), Stereo
- Speakers (A) · Binding Post · Stereo
- Speakers (B) · Binding Post · Stereo
- Tape 1 (play) · RCA (Phono, Cinch) · Socket (Female), Stereo
- Tape 1 (rec) · RCA (Phono, Cinch) · Socket (Female), Stereo
- Tape 2 (play) · RCA (Phono, Cinch) · Socket (Female), Stereo
- Tape 2 · DIN · Socket (Female), Stereo
- Tape 2 (rec) · RCA (Phono, Cinch) · Socket (Female), Stereo
- Tuner · RCA (Phono, Cinch) · Socket (Female), Stereo
|
| Controls | - Balance · Rotary Pot
- Bass · Rotary Pot
- Function (source) · Rotary Pot with Switch · MC/Phono / Tuner / Aux
- Loudness · Toggle Switch · On / Off
- Monitor Tape 1 · Toggle Switch
- Monitor Tape 2 · Toggle Switch
- Power · Toggle Switch
- Speakers · Rotary Switch · Off / A / B / A+B
- Tape 1 Monitor · Toggle Switch
- Tape 2 Monitor · Toggle Switch
- Tone · Toggle Switch · On / Off
- Treble · Rotary Pot
- Volume · Rotary Pot
|
