| Notes | Each cab is fitted with 6 Elac 8″ drivers which are marked as 8RM/211 and 10 ohms. The 6 drivers in each cab are wired in 2 sets of 3. Each set of 3 is wired in series giving 30 ohms and then the 2 sets are wired in parallel giving a total impedance for the cab of 15 ohms. Watkins put an impedance badge on the back of each cab stating they are 12 ohms which they obviously felt was close enough to 15 ohms and the 12 ohms then matched up with the 12 ohm output sockets on amps such as the PA40 and PA100. |
