| Form Factor | Tabletop |
| Signal Path | Analog Hardware |
| Dimensions | 420 x 117 x 356 mm |
| Weight | 4.9 kg |
| Power | AC 100 to 240V, 50/60Hz |
| Frequency Response | 20Hz to 20kHz |
| Speed Select | 33⅓ rpm |
| Speed Select | 45 rpm |
| Drive Type | Belt Drive |
| Rotation Speed Variation | +/–2% |
| Wow and Flutter | 0.2% |
| Signal-to-Noise Ratio | 67dB or higher (A-weighted, 20kHz LPF) |
| Signal-to-Noise Ratio | 60dB or higher (unweighted, 20kHz LPF) |
| Platter | Aluminum Die-cast |
| Diameter of Platter | 12", 30cm |
| Tonearm type | Static Balance, Straight |
| Effective Arm Length | 8.8", 223mm |
| Stylus Pressure Range | 0 to 5g |
| Supported Cartridge Weight | 3.5 to 6.5g |
| Anti-skating Adjustment | Supported |
| Cartridge type | MM type (audio-technica AT95E factory installed) |
| Stylus Shape | Elliptical |
| Stylus Construction | Bonded Round Shank |
| Stylus mount | Half inch |
| Channel Separation | 20dB at 1kHz |
| Channel Balance | 2.0dB |
| Tracking Force | 1.5 to 2.5g |
| Vertical Tracking Angle | 20 degrees |
| Supported Load Impedance | 47k ohms |
| Output Voltage | 4.5mV +/–3dB |
| Stylus Pressure | 2.0g +/–0.5g |
| Cartridge Weight | 5.7g +/–0.5g |
| Head-shell Weight | 10g (including Screws, Nuts and Wires) |
| Type of Amplifier | MM type (On/Thru switchable) |
| Output Voltage | Phono/Line switchable |
| Phono Output | 4.5mV +/–3dB |
| Line Output | 120mV (–13dBV) |
| USB connector | USB B type |
| USB output signal | PCM 48kHz/16-bit |
| Supported OS | Windows 7, Windows 8, Windows 8.1, Windows 10 OS X Lion(10.7), OS X Mountain Lion(10.8), OS X Mavericks(10.9) |
| Power Consumption | 1.5W (less than 0.5W at Standby) |
| Connections |
|
| Links | Maker |
Added by risto.haavistu