| Signal Path | Analog Hardware |
| Dimensions | 412 x 331 x 115 mm / 16.2 x 13 x 4.5 inch |
| Weight | 6 kg / 13 lb |
| Power | AC 110 to 220V 50Hz |
| Speed Select | 33⅓ rpm |
| Speed Select | 45 rpm |
| Drive Type | Belt Drive |
| Channels | 2 Channel Channel |
| Connections | - Phono Out · RCA (Phono, Cinch)
- Earth Wire · Other
|
| Controls | - Speed Control · Rotary Switch
- On/Off · Rotary Switch
- Arm Up/Down · Slide Switch
- Antiskating · Rotary Pot
|
| Notes | There is an antiskating weight of 1 g & 1,7 g supplied. Tracking weight is adjusted in the regular way by screwing the counterweight on the back of the arm closer or further from the balance point of the arm. The arm has a standard SME fitting, the Lenco headshell has two adjustable screws to adjust the cartridge alignment. A white hole adapter is supplied. Speed can be fine tuned by moving the fixed positions of the speed slider control after setting them loose by the corresponding screw. Supplied with a Lenco headshell and Lenco M100 cartridge with corresponding stylus. This is an original Lenco of Switzerland-product, not the cheap line of Asian USB-turntables released nowadays under the same brand. |
