| Model ID | Monitor Gold 15" |
| Form Factor | Part |
| Signal Path | Passive Hardware |
| Dimensions | 38.7 × 38.7 × 22.9 cm (W × H × D) |
| Weight | Driver: 20.8lbs Crossover: 3lbs |
| Replacement Woofer Cone | P/N 7900-0004 |
| Replacement Tweeter Diaphragm | P/N 7900-0205 |
| Driver Type | Dual-Concentric Full-Range |
| Frequency Response | 23Hz-20kHz |
| Sensitivity | 94.8dB/2.83V/m |
| Power Handling (Continuous Program) | 50W |
| Impedance (Nominal, System) | 8Ω |
| Impedance (Minimum, System) | 5Ω |
| Polar Distribution (60°) | -4dB at 10kHz |
| Intermodulation Products | <2% |
| Crossover Frequency | 1kHz |
| Impedance (Woofer) | 8Ω |
| Voice Coil Resistance (Re) (Woofer) | 5.5Ω |
| Impedance (Tweeter) | 16Ω |
| Voice Coil Resistance (Re) (Tweeter) | 10.5Ω |
| Voice Coil Diameter (Woofer) | 2" |
| Voice Coil Diameter (Tweeter) | 2" |
| Free Air Resonant Frequency (Fs) (Woofer) | 26Hz |
| Effective Radiating Area (Sd) (Woofer) | 770cm² |
| Woofer Cone Material | Paper |
| Surround Material | Paper |
| Suspension Material | Plastic Impregnated Fabric |
| Compression Diaphragm Material | Plastic-Coated Aluminum Alloy |
| Voice Coil Material (Tweeter) | Aluminum |
| Waveguide Phase Compensation | PepperPot |
| Horn Cut-Off Frequency | 500Hz |
| Flux Density (Woofer) | 13,500 Gauss |
| Flux Density (Tweeter) | 18,000 Gauss |
| Magnet Weight | 13lbs |
| Magnet Material | Ticonal-G (Random-Oriented Grain AlNiCo V) |
| Moving Mass (Mms) | 90g |
| Electrical Q (Qes) | 0.22 |
| Mechanical and Acoustic Q (Qms) | 2 |
| Total Q (Qts) | 0.2 |
| Force Factor (Bl) | 19.2 |
| Total Suspension Compliance (Cms) | 0.42mm/N |
| Equivalent Volume Compliance (Vas) | 350l |
| Mechanical Resistance (Rms) | 7.45Ωm |
| Finish (Cover) | High Impact Plastic (Gold) |
| Finish (Frame) | Light-Gray Stove Enamel |
| Finish (Magnet Assembly Parts) | Cadmium Plate |
| Connections | |
| Controls | - Treble Energy (Shelving) (1kHz-20kHz) · Rotary Switch · -2 to 2, 5 Steps
- Treble Roll-Off (Slope) · Rotary Switch · 4 Steps
|
