| Dimensions | 16.5" x 5.5" x 13.75" |
| Weight | 6.4 kg (14.41 lb) |
| Frequency Response | 20-20,000Hz |
| Drive System | Belt Drive |
| Motor | DC Motor |
| Speed | 33 1/3 RPM, 45 RPM |
| Wow and Flutter | 0.20% |
| Signal-to-Noise Ratio (Weighted) | 67dB or higher (A-weighted, 20kHz LPF) |
| Platter | Die-cast Aluminum |
| Diameter of Platter | 12", 30cm |
| Auto-Stop | Yes |
| Turntable Mat | Rubber |
| Tonearm Type | Static Balanced, S-Type |
| Supported Cartridge Weight | 3.5 to 6.5g |
| Anti-skating Adjustment | Yes |
| Pivot Bearing | Yes |
| Tonearm Material | Metal |
| Cartridge Type | Moving Magnet (MM) |
| Cartridge Model | Audio Technica AT95E |
| Stylus | 0.4x0.7mil Bonded Elliptical(Diamond) |
| Cantilever | Aluminum |
| Cartridge Mount | Half inch |
| Channel Seperation | 20dB at 1kHz |
| Channel Balance | 2.0dB or less at 1kHz |
| Load Impedance/Capacitance | 47k Ohms/100pF |
| Output Voltage | 2.5mV +/-3dB |
| Cartridge Weight | 5.7g |
| Headshell Weight | 10g |
| Recommended Tracking Force | 2.0g |
| Vertical Tracking Angle | 20 degrees |
| Connector | RCA |
| Preamp | Yes, PHONO/LINE Switchable |
| Phono Output | 2.5mV +/-3dB |
| Line Output | 140mV (-17dBV) |
| Ground Terminal | Yes |
| Input | 100V -240V AC (50/60Hz) |
| Output | 12V / 500mA |
| Consumption | 1.5W |
| Operating Temperature | 5°C to 35°C |
