| Model ID | M-1.0t Non-Inverting Version |
| Form Factor | Standard Width |
| Signal Path | Analog Hardware |
| Dimensions | 48.3 × 9.5 × 34.3 cm (W × H × D) |
| Weight | 19lbs |
| Power | 120VAC/60Hz (USA and Canada), 230VAC/50H (Europe) |
| Frequency Response | 20Hz-20kHz +0dB/-0.5dB) |
| Power Output (Stereo, 8/4Ω) | 200W/400W |
| Power Output (Bridged, 8Ω) | 1000W |
| Output Power (Clipping, Stereo, 8/4Ω) | 350W/500W |
| Dynamic Headroom (8/4Ω) | 4.1dB/3.1dB |
| THD (20Hz-6kHz) | <0.15% |
| IMD (SMPTE) | <0.1% |
| SNR (Rated Output, A-Weighted) | -100dB |
| SNR (1W, A-Weighted) | -82dBW |
| Input Impedance | 100kΩ |
| Sensitivity (Rated Output, 8Ω, 1kHz) | 1.3V rms |
| Sensitivity (1W, 8Ω, 1kHz) | 95mV |
| Damping Factor | >9 |
| Gain | 30dB |
| Power Consumption | 1200W |
| Frequency Bandwidth (1W) | 10Hz-100kHz +0dB/-3dB) |
| Slew Factor | >200 |
| Channels | 2 Channel |
| Connections | - Input · RCA (Phono, Cinch) · Stereo, Unbalanced, Socket (Female)
- Output · Binding Post (Universal) · Stereo
|
| Controls | - Power · Rocker Switch
- Bridged Mode · Slide Switch
|
| Notes | Revamp of the M-1.0 incorporating the altered parameters from "The Carver Challenge" to make the amplifier sound like the Conrad-Johnson Premier Four provided by Stereophile.
Starting at serial number 4500 (or 70100000) and above, both channels now in phase. Bridge switch to invert the phase of the right channel added to rear to allow for mono operation. |
