| Form Factor | Standard Width |
| Signal Path | Analog Hardware |
| Dimensions | 48 × 14.7 × 40.4 cm (W × H × D) |
| Weight | 25lbs |
| Power | 220VAC, 50/60Hz 220W |
| Power Output (8/4Ω) | 25W/27W |
| Power Output (1kHz, 8/4Ω) | 27W/30W |
| THD (Rated Output) | ≤0.5% |
| THD (1W) | ≤0.07% |
| IMD (Rated Output) | ≤0.5% |
| IMD (1W) | ≤0.07% |
| Power Bandwidth (IHF, THD 0.5%) | 5Hz-60kHz |
| Damping Factor (1kHz, 8Ω) | ≥35 |
| Residual Hum & Noise (8Ω) | ≤0.5mV |
| Input Sensitivity (Phono) | 2.5mV |
| Input Impedance (Phono) | 50kΩ |
| Phono Overload Level (RMS) | 110mV |
| Phono Overload Level (p-p) | 310mV |
| Input Sensitivity (Mic) | 7mV |
| Input Impedance (Mic) | 85kΩ |
| Input Sensitivity (Aux) | 150mV |
| Input Impedance (Aux) | 60kΩ |
| Input Sensitivity (Tape Play 1, 2) | 150mV |
| Input Impedance (Tape Play 1, 2) | 60kΩ |
| Output Level (Tape Rec 1, 2) | 150mV |
| Output Level (Tape Rec 2 [DIN]) | 30mV |
| Output Impedance (Tape Rec 2 [DIN]) | 80kΩ |
| Frequency Response (RIAA EQ) | 30Hz-15kHz ±0.5dB |
| SNR (Phono, IHF, Short-Circuited, A network) | ≥70dB |
| Frequency Response (Aux, Tape) | 20Hz-30kHz +0.5dB/-1dB |
| SNR (Mic, IHF, Short-Circuited, A network) | ≥65dB |
| SNR (Aux, Tape, IHF, Short-Circuited, A network) | ≥95dB |
| FM Sensitivity (IHF) | 1.9µV |
| FM Capture Ratio (IHF) | 1.0dB |
| FM Selectivity (IHF) | 60dB |
| FM SNR | 70dB |
| FM Image Rejection (98MHz) | 60dB |
| FM IF Rejection (98MHz) | 90dB |
| FM AM Suppression | 50dB |
| FM THD (Mono) | ≤0.2% |
| FM THD (Stereo) | ≤0.4% |
| Frequency Response (FM) | 20Hz-15kHz +0.2dB/-2.0dB |
| Frequency Response (FM) | 50Hz-10kHz +0.2dB/-0.5dB |
| FM Stereo Separation (1kHz) | ≥40dB |
| FM Stereo Separation (50Hz-10kHz) | ≥30dB |
| FM Subcarrier Suppression | 40dB |
| Input Impedance (Antenna, Balanced) | 300Ω |
| Input Impedance (Antenna, Unbalanced) | 75Ω |
| AM Sensitivity (IHF, Ferrite Antenna) | 300μV/m |
| AM Sensitivity (IHF, External Antenna) | 15μV |
| AM Selectivity | 35dB |
| AM SNR | 50dB |
| AM Image Rejection | 40dB |
| AM IF Rejection | 70dB |
| Channels | 2 Channel |
| Notes | SEMCO (Sweden), NEMCO (Norway) and DEMCO (Denmark) regions model. |
