ESC
SH-09

SH-09

ManufacturerRoland
FunctionSynthesizer (Monophonic)
Produced1980
CountryJapan
Form FactorKeyboard
Signal PathAnalog Hardware
Dimensions605(w) x 305(d) x 100(h) mm
Weight6.1 kg
Channels1 Voice
LinksOwners Manual at Internet Archive · Service Manual at fdiskc · Sound on Sound Mar 1995 · Perfect Circuit Audio Demo
NotesThe SH-09 (or Synthesizer-09) is a single VCO monophonic analog synthesizer with a 2 1/2 octave, 32-note (F-C) keyboard. The VCO is switchable between 5 octaves: 2', 4', 8', 16', 32'. Available waveforms are sawtooth, square, pulse (with pulse width modulation), or white noise. There is also a sub-oscillator switchable between a square wave one octave down, a square wave two octaves down, and a pulse wave three octaves down. It is possible select the noise source at your oscillator and still have the sub-oscillator as a waveform. The VCF is self oscillating and can be modulated by the envelope follower which is wired to the external input. The envelope generator is an ADSR (attack decay sustain release) with a slider for each stage. On the control panel to the left of the keyboard is a horizontal pitch-bend/modulation lever, with pressure up and down controlling modulation amount. There are also two sliders controlling amount of modulation routed to the VCO and VCF, as well as a slider adjusting portamento amount and the main power switch. On the back panel there is a main output, and the CV/gate inputs and outputs. [information from The A-Z of Analogue Synthesizers, by Peter Forrest, published by Susurreal Publishing, Devon, England, copyright 1994 Peter Forrest]