| Connections | - External Substance In · 3.5mm Miniature Phone Jack (1/8") · External in
- Strength Out · 3.5mm Miniature Phone Jack (1/8") · The external signal as processed by the Strength circuit
- Tonic Modulation Interference Input · 3.5mm Miniature Phone Jack (1/8") · AC coupled modulation input for Tonic
- Strega Tones Core Output · 3.5mm Miniature Phone Jack (1/8") · Triangle-shaped audio substance output here, 10V pp range
- Strega Tones Sub Harmonics Output · 3.5mm Miniature Phone Jack (1/8") · Sub harmonics not used in the Time/ Filter experiment are output here, range 10Vpp
- Time Modulation Input · 3.5mm Miniature Phone Jack (1/8") · Attenuated AC coupled modulation input for Time. Normalled to Strega Tones Sub Harmonics Output. Typical input 10Vpp
- Blend CV In · 3.5mm Miniature Phone Jack (1/8") · Direct Coupled, uni-polar CV Input for Blend, range 0VDC to 5VDC
- Modular Level Output · 3.5mm Miniature Phone Jack (1/8") · TS Mono Audio Signal, 10Vpp
- Line/Headphone Output · 3.5mm Miniature Phone Jack (1/8") · TRS Stereo Audio Signal, 3Vpp
- CV1 · 3.5mm Miniature Phone Jack (1/8") · DC Voltage representation of the of External In as processed by the Strength circuit. 0 to 10VDC
- CV2 · 3.5mm Miniature Phone Jack (1/8") · DC Voltage Feedback signal from the Time/ Filter circuit. Range +/-5VDC
- Activation CV In · 3.5mm Miniature Phone Jack (1/8") · Patch control signals here for activation of Strega Tones from external sources or the CV sources contained within Strega such as CV1, CV2 and Cycle. Direct coupled, range +/-5VDC
- Tones CV In · 3.5mm Miniature Phone Jack (1/8") · Direct Coupled, bi-polar CV Input for Tones, range +/- 10VDC
- Tonic 1V/ Octave · 3.5mm Miniature Phone Jack (1/8") · Classic bi-polar pitch control for Tonic, direct coupled, optimal range +/-5VDC
- Absorb Combo Control · 3.5mm Miniature Phone Jack (1/8") · Determines how much of the Filtered substances will be absorbed and therefore diminished into the earth and how much will be presented for blending. With nothing patched to Absorb CV In, operates as panel control for Absorb. With signal patched to Absorb CV In, operates as unipolar attenuator for that signal, setting amount of control that signal has over the Absorb process
- Decay · 3.5mm Miniature Phone Jack (1/8") · Sets the iterations of Time/ Filter experiment. Ranges from a handful to infinity
- Begin And End In · 3.5mm Miniature Phone Jack (1/8") · Control input to Begin and also to End Agitation. Expects Gate signal of 0VDC to 10VDC magnitude. When Gate signal is High, Agitation begins and level is sustained as long as Gate is High. When Gate is Low, Agitation stops until Gate goes High again. Normalled to Gate High
- Speed CV In · 3.5mm Miniature Phone Jack (1/8") · Attenuated control input for the Agitation Function Speed. Range +/-5VDC
- Agitation Function Out · 3.5mm Miniature Phone Jack (1/8") · DC Voltage for agitation purposes. Range 0VDC to 6VDC
- Filter CV In · 3.5mm Miniature Phone Jack (1/8") · Direct Coupled, bi-polar CV Input for Filter, range +/- 10VDC
|
| Notes | Strega is an audio alchemical experiment. Activate! Spill the tonic into time and let time decay through the filter to hear the results.
Strega is an instrument designed in collaboration with Alessandro Cortini. Inspired by Cortini’s music and sonic experimentations, Strega embodies the seen and unseen, the sign and magic, the alchemy of sound.
Strega is able to conjure audio tones, generate control signals, and process external sounds. Patch the 0-COAST or any other line level source into the Strega to unlock new sounds!
This new instrument takes the same form factor as the 0-COAST and 0-CTRL. It was designed to be controlled by the 0-CTRL or the 0-COAST’s MIDI CV B outputs and is equally happy interfacing with Eurorack modules as well. |