Kemper Profiler PowerRack (MK2)

Kemper Profiler PowerRack (MK2)

ManufacturerKemper
FunctionAmplifier, Guitar, Audio Interface
CountryGermany
Model IDPowerrack MK2
Form Factor19" Rackmount
Signal PathHybrid Analog / Digital Hardware
DimensionsHeight: 13.9 cm (5.47 inches), 3 HE (3 RU) Width: 48.3 cm (19 inches) Depth: 22 cm (8.66 inches)
Weight6.18 kg (13.62 pounds)
Power100-125 or 190-245 V AC, max. 10 A
Frequency ResponseFrequency:< 50 Hz to 60 Hz, single phase
Connections
  • Front INPUT: ¼ inch TS unbalanced, dynamic range 127 dB, impedance 1 megohms · 1/4" Phone Jack (6.35mm)
  • ALTERNATIVE INPUT: ¼ inch TRS balanced with ground lift, dynamic range 111 dB, impedance 825 kohms · 1/4" Phone Jack (6.35mm)
  • RETURN: XLR balanced, ¼ inch balanced with ground lift, dynamic range =105 dB, impedance 825 kohms · XLR
  • MAIN OUTPUT L and R: XLR balanced, ¼ inch TS unbalanced with ground lift, output level: XLR +4 dBu, TS +4 dBu · XLR
  • MONITOR OUTPUT: ¼ inch TS unbalanced with ground lift, output level: +4 dBu · 1/4" Phone Jack (6.35mm)
  • DIRECT OUTPUT/SEND: ¼ inch TS unbalanced with ground lift, output level: +4 dBu, output dynamic range: >108 dB · 1/4" Phone Jack (6.35mm)
  • HEADPHONE Output: ¼ inch TRS stereo, 32-600 ohms, 330 mW @ 32 ohms, 220 mW @ 600 ohms · 1/4" Phone Jack (6.35mm)
  • Eight USB audio channels at MK 2 Series or four USB audio channels at MK 1 Series with Windows® and macOS® at 44.1 kHz (required · USB
  • S/PDIF Input/Output 44.1/48/88.2/96 kHz (24 bit) master and slave with RCA phone connectors for coax cables · RCA (Phono, Cinch) · S/PDIF
  • Power Amp SPEAKER OUTPUT: 600 watts at 8 ohms, 300 watts at 16 ohms (PROFILER PowerHead and PowerRack only) · 1/4" Phone Jack (6.35mm)
  • USB: USB 2.0 (FS) compatible device, USB-A and USB-B connectors · USB
  • SWITCH/PEDAL: two ¼ inch TRS, each for mono/stereo switch or expression pedal (10 kohms min, 100 kohms max. impedance) · 1/4" Phone Jack (6.35mm)
  • MIDI IN/OUT/THRU: 5-pin DIN connectors · Other
  • Network: RJ45 connector · RJ45