| Form Factor | Desktop / 19" Rackmount Convertible |
| Signal Path | Hybrid Analog / Digital Hardware |
| Dimensions | Width - 432 mm (17”), Height - 88 mm (3.5”), Depth - 358 mm (14”) |
| Weight | 5kg (11 lbs) |
| Power | Mains, 100-240v, 47-63 Hz, 30W Max, High performance internal switch-mode supply |
| Frequency Response | 20 Hz to 30KHz +0/-2dB |
| Main outputs | +4dBu XLR |
| Maximum output level | +26dBu |
| Monitor | 0dBu RCA |
| FX sends | -2dBu RCA |
| 3-band total kill EQ | +6dB/off (kill), 120Hz, 1.2kHz, 10kHz |
| 2 analogue VCF filters | (low-pass, band-pass, high-pass, resonance frequency, and filter ‘on’ switch) |
| RIAA | 7-100mV 47K/330pF (input sensitivity for THREE turntables (four via internal jumper link)) |
| Mic Sensitivity | -45 to -15dBu |
| Distortion at | 1kHz Line in at +0Vu out <0.02% |
| Main Mix noise | 22Hz-22KHz unweighted <-80dBu (84dB S/N) |
| Residual Mix noise | 22Hz-22KHz unweighted <-97dBu |
| Fader Shutoff | <-90dB |
| Channels | 4 Channel (multi-input stereo, 3-band total kill EQ: +6dB to off, RIAA preamps for turntables on 3 inputs; channel 1 is Line/Line), 1 Voice (Mic input: On XLR connector; gain control and 2-band EQ control available), 2 Track (2 FX sends: pre/post selection (internal on FX2)), 2 Track (2 stereo returns), 1 Track (Headphone monitor with mix/cue control: 3.5mm and ¼” sockets) |
| Links | Manufacturers Page |
| Notes | Incl.
USB SoundCard: Uses 24 bit stereo Analogue to Digital converters and Digital to Analogue converters (not lower spec CODECs
Sample rate can be set to either 44.1kHz or 48kHz; interfaces to any digital audio source up to 192kHz
Soundcard fed from main mix, FX1, or direct from channels
8 channels – either 6 channels from a PC and 2 returns or 4 channels from a PC and 4 returns.
Sends – mix, FX, or individual analogue channels may be routed to PC or digital outputs
-
MIDI Controller:
Mappable MIDI controls:
105 MIDI control messages available
8 x 60mm linear faders
16 x detented rotary pots
10 rotary encoders, 50 switches, 2 custom jog wheels with micro switches
8 illuminated push switches
Multi-function jog wheels with switched navigation control
Xone:3D is compatible with any PC software that has MIDI assignable functions: for instance,
Lighting controller or visual effects programs
The Xone:3D ships with mains leads, USB cable, user guide, spare knobs & faders, A&H stickers, Traktor overlays, Ableton overlays |
