| Form Factor | Desktop / 19" Rackmount Convertible |
| Signal Path | Analog Hardware |
| Dimensions | Width - 320 mm (12.6”), Height - 87.6 mm (3.5”), Depth - 358 mm (14”) |
| Weight | 6 kg (13 lbs) |
| Power | AC mains 110 to 240V AC @ 47/63Hz, 30W max |
| Frequency Response | 5Hz to 30kHz +/-0.5dB |
| 0dBu = 0.775 Volts rms, +4dBu = 1.23V rms 0dBV = 1 Volt rms, -10dBV = 316mV rms |
| Music EQ 4-Band | +6dB / -30 (Mids) |
| Max output level MIX 1 | +22dBu into 47 ohm |
| Max output level MIX 2 | +20dBu into 47 ohm |
| Max output level AUX | +21dBu into 47 ohm |
| Max output level REC | +11dBV into 600 ohm |
| Internal headroom Channels | +22dB |
| Freq response | +/-0.5dB 5Hz to 30kHz |
| Distortion | < 0.003% THD+noise @1kHz |
| Crosstalk | > -93dB Inter-channel |
| MIC EIN | 22-22kHz -126dB 150 ohm source |
| Residual noise MIX 1 | -99dBu |
| Residual noise MIX 2 | 106dBu |
| Residual noise AUX | -90dBu |
| Residual noise BOOTH | 106dBu |
| Residual noise REC | -96dBu |
| Mix noise MIX 1 | 88dBu (-90dB S/N) |
| Mix noise MIX 2 | -90dBu (-88dB S/N) |
| Mix noise AUX | -88dBu (-86dB S/N) |
| Mix noise BOOTH | -89dBu (-87dB S/N) |
| Mix noise REC | -96dBu |
| Channel meters Peak reading 9 led | -20 to +10 |
| Main meters Peak reading 9 led | -20 to +10 |
| Mic EQ 4-Band | +/-15dB 100, 250, 2.5k, 10kHz |
| Infinity | (12dB/Oct) |
| LF/HF | 250,350, 2k, 2.5K |
| Fuse rating | 100-240V AC T500mAL |
| Channels | 6 Channel (dual stereo channels (4 phono/line, 2 mono/mic or stereo return), 4-band EQ – total kill on HF and LF, wide Q for cut, narrow Q for boost,), 2 Track (independent stereo mix outputs), 2 Track (aux sends for output to external FX units), 1 Track (VCF system (2 independent stereo filters with frequency and resonance controls)), 2 Track (independent LFO’s for filter manipulation), 1 Track (Booth output – dedicated output on TRS jack), 2 Track (headphone outputs (1/4” and 3.5mm)) |
| Links | Manufacturers Page |
| Notes | Incl.
Ch fader 60mm stereo or rotary VCA
Mix 1 & 2 faders Rotary
Crossfader 45mm stereo VCA
Replaceable
Filters Dual stereo VCF
Analogue
Panel Steel
PSU Internal switch mode
Mains In 3 pin IEC socket
Power Lead Country dependant
-
MIDI values can be output from 6 controls (e.g. crossfader, LFO)
P&G easy change professional VCA crossfader
Illuminated lightpipes showing status of performance controls
Intelligent cue for pre or post EQ monitoring
Monitor section includes post EQ switch, split cue and mix to cue balance
Ducking control on mono/mic channel |
