| Model ID | Tone-Lok PH7 |
| Form Factor | Footswitch |
| Signal Path | Digital Hardware (including Analog Connections) |
| Dimensions | 125(D) x 75(W) x 53(H)mm |
| Weight | 460g (with battery) |
| Power | 9V PSU/Battery |
| Channels | 1 Channel |
| Connections | - Input · 1/4" Phone Jack (6.35mm) · Mono
- Output · 1/4" Phone Jack (6.35mm) · Mono
|
| Controls | - Mode · Slide Switch · 1/2
- Speed · Rotary Pot
- Depth · Rotary Pot
- Feedback · Rotary Pot
- Level · Rotary Pot
- On/Off · Momentary Push Switch
|
| Displays | |
| Links | Manual at SynthManuals.com |
| Notes | Designed to emulate the effect of a rotating speaker, the PH7 has a switchable phase circuit capable of either four or eight stages of smooth phasing. With these two very different tonal modes, you can go from a subtle shimmer to all out 70's "Let's Get Funky" phasing. |
