| Notes | CHANNEL INPUTS
Phono 1 & 2: Stereo RCA phono inputs for direct turntable connection.
Auxes 1 - 3: Stereo RCA inputs for connection of line level sources such as CD,MP-3, tape etc. Optional preamp cards for Phono/Mic level connections.
Aux 4: Balanced XLR input for connection of mic level source. Optional preamp cards for Phono/Line level connections.
AUXES
Auxes A - E : Stereo RCA inputs for connection of external line level sources. These can be routed to any of the Aux inputs 1-4 (channels 3-6), allowing an extra level of input flexibility.
BOOTH OUTPUT
Stereo output, supplied on both isolated balanced XLR and unbalanced RCA connectors. Controlled by the master Booth level setting.
HOUSE OUTPUT
Stereo output, supplied on both balanced XLR and unbalanced RCA phono connectors. Controlled by the master House level setting. For lighting controllers, a mono summed House output is also provided on unbalanced jack, and is independent of the Master house level control.
TAPE OUTS
For recording purposes, two stereo tape outs are supplied on unbalanced RCA connectors.
FX LOOP
A stereo FX loop is provided on unbalanced RCA connectors, in a ‘Send & Return’ format. This allows an external FX device to be patched into the main House& Booth signal paths.
HEADPHONE OUTPUT
Accessed via the front panel, the illuminated headphone output is supplied on a 1/4" stereo jack.
POWER SUPPLY
The high quality internal power supply is an integral part of the 1620LE’s sound. An IEC power inlet is provided, along with a mains voltage selector switch - meaning that wherever you travel, your 1620LE can go with you.
FREQUENCY RESPONSE
Headphone Output
20Hz-20kHz (+/-1.5dB)
All Other Outputs
20Hz-20kHz (+0/-1dB)
TOTAL HARMONIC DISTORTION
Balanced House Output
<0.1%, 30Hz-20kHz, +20dBu, 10k Ohms
Unbalanced House Output
<0.05%, 20Hz-20kHz, +20dBu, 10k Ohms
Booth Output
<0.05%, 20Hz-20kHz, +20dBu, 10k Ohms
Tape & FX Loop Outputs
<0.05%, 20Hz-20kHz, +20dBu, 10k Ohms
Headphone Output
<0.3%, 20Hz-20kHz, +20dBu, 200 Ohm load
IMPEDANCES (INPUT AND OUTPUT)
Phono 1&2 Input
47k Ohms
Microphone Input
Optimised for 150 Ohm sources
Aux Input
10k Ohm nominal
FX Loop Input
10k Ohms
Balanced House Output
<50 Ohms
Unbalanced House Output
75 Ohms
Booth Output
75 Ohms
Headphone Output
<50 Ohms
Mono Output
5k Ohms
Tape & FX Loop Outputs
75 Ohms
MAXIMUM OUTPUT LEVELS
Balanced House Output
+25dBu into 600 Ohms
Unbalanced House Output
+20dBu into 600 Ohms
Booth Output
+22dBu into 10k Ohms
Mono Output
+14dBu into 5k Ohms
Tape & FX Loop Outputs
+22dBu into 10k Ohms
POWER SUPPLY
Selectable 100-125/200-250V AC, 50/60Hz. Power consumption 20W max.
Six stereo channels with legendary Urei sound quality
Individual L/R balance control on every channel
Authentic and responsive rotary faders on all channels
Channels 1 and 2 feature RCA phono inputs, allowing the easy integration of twin decks
Auxes 1, 2 and 3 feature line level preamps, for direct connection of external sources
Optional preamp cards allow Auxes 1-4 to carry Mic, Line or Phono level inputs
Aux 4 carries a dedicated mic preamp, allowing instant connection of an external microphone
Five extra aux inputs (A-E) can each be routed to auxes 1 to 4, giving unrivalled user flexibility
Master Booth and House outputs, each with a dedicated level control
Master mono House outputMaster bass and treble controls give +/-10dB of sweetening on all main outputs
Sophisticated headphone section can be fed from any of the six channels, or the main program output
Front panel illuminated headphone socket with dedicated level control
Dual stereo recording outputs
Master send-and-return FX loop
Internal engineer set-up controls
Durable construction for total reliability
3U 19” rack mounting format |
