| Signal Path | Analog Hardware |
| Dimensions | Diameter: 2.1” (53,34mm)
Length: 8.9” (226,06mm) |
| Weight | 26.9oz (762,6g) |
| Power | 48 +/- 4V (phantom) |
| Frequency Response | 30Hz~20000Hz |
| Type | Single diaphragm pressure gradient condenser microphone |
| Polar pattern | Cardioid |
| Sensitivity | 14mV/Pa=-37dB (0dB=1V/Pa) |
| Output impedance | <200 Ohm |
| Load impedance | >1000 Ohm |
| Maximum SPL | 131 dB SPL for 1% THD @1000Hz (0dB SPL=0.00002Pa) |
| Noise | (Line): 27dB (A weighted)---17dB |
| S/N ratio | 77 dB |
| Current consumption | <2.5mA |
| Circuit | JFET impedance converter, discrete balanced output |
| Channels | 1 Channel |
| Connections | - Gold-plated 3-pin connector · XLR · Plug (Male), Mono, Balanced
|
| Controls | - PAD · Toggle Switch · -10dB or -20dB
- Low cut · Toggle Switch · 75Hz or 150Hz (6dB/Octave)
|
| Links | Official webpage · C SERIES MICROPONES instruction book download (pdf) |
| Notes | The Studio Projects C1 is an externally polarized cardioid pressure gradient transducer microphone with FET impedance converter. Diaphragm material is 6μm mylar for natural reproduction of vocals and instruments.
It features dual selectable pads and high pass filters for a total of nine possible modes of operation.
The output circuitry is active and is capable of driving long cable runs. |
